Proposal to Improve Workplace Safety for Production Operators Using the Job Safety Analysis Method at CV XYZ
DOI:
https://doi.org/10.65310/s1pnwf36Keywords:
OSH Dashboard, Job Safety Analysis, Workplace Safety, Risk Control, 5 Whys AnalysisAbstract
This study aims to identify potential hazards, assess occupational safety risk levels, determine the root causes of dominant risks, formulate control recommendations, and develop an occupational safety dashboard for the knife production process at CV XYZ. The study employs an empirical approach through field observations and interviews, while activity mapping is conducted using an Operation Process Chart. Hazard identification and risk assessment were conducted using a Job Safety Analysis with a Probability Severity matrix; subsequently, the activities with the highest risks were analyzed using the 5 Whys Analysis. The results showed that of the 17 activities evaluated, 4 were categorized as Low Risk, 12 as Medium Risk, and 1 as High Risk specifically, the heat treatment process, which had a Risk Number of 12. The root cause analysis identified the lack of safety signs and communication materials regarding the use of personal protective equipment as the dominant causes of increased workplace accident risk. Control recommendations include installing safety signs, posting notices regarding the mandatory use of personal protective equipment, and providing heat-resistant gloves, safety goggles, and heat-resistant safety shoes. All research findings are integrated into an OSH dashboard built on Google Looker Studio, which presents risk information, safety indicators, PPE requirements, and cost analyses to support data-driven decision-making aimed at improving the effectiveness of workplace safety management.
Downloads
References
Al Aqsa, U., Andivas, M., & Kurnia, W. I. (2024). Analisis Kecelakaan Kerja di PT. XYZ dengan Menggunakan Metode Job Safety Analysis. Jurnal Surya Teknika, 11(2), 550-556. https://doi.org/10.37859/jst.v11i2.7350.
Andivas, M., Harits, D., & Kisanjani, A. (2025). Evaluasi Keselamatan Kerja Mesin Plasma Cutting Dengan Pendekatan JSA Dalam Identifikasi Bahaya. Teknika Sains: Jurnal Ilmu Teknik, 10(1), 9-16. https://doi.org/10.24967/teksis.v10i1.3623.
Aprilliani, C., Frinaldi, A., Lanin, D., Yasril, A. I., Audia, W., & Febrina, C. (2025). Identification of Potential Hazards Using the JSA Method (Job Safety Analysis) in Welding Workshop. Buletin Keslingmas, 44(4), 246-252. https://doi.org/10.31983/keslingmas.v44i4.14113.
Ardiansyah, A. R., Anindita, G., & Dhani, M. R. (2025). Penerapan Metode Double Ishikawa dan 5 Whys Analysis Dalam Analisis Kecelakaan Loading Unloading Billet Baja. Journal of Safety, Health, and Environmental Engineering, 3(1), 66-73. https://doi.org/10.35991/jshee.v3i1.51.
Budiharjo, B. (2024). Analisis Risiko Kecelakan Kerja Dengan Metode Job Safety Analysis Pada Proyek Konstruksi Di CV. XYZ. Industri Inovatif: Jurnal Teknik Industri, 14(2), 268-282. https://doi.org/10.36040/industri.v14i2.11170.
Faiq, A. G., & Apsari, A. E. (2024). Analisis risiko keselamatan kerja pada bagian produksi dengan metode Job Safety Analysis dan Hazard and Operability Study. Jurnal Ilmiah Nusantara, 1(4), 833-843. https://doi.org/10.61722/jinu.v1i4.1943.
Ghika Smarandana, Ade Momon, & Jauhari Arifin. (2021). Penilaian Risiko K3 pada Proses Pabrikasi Menggunakan Metode Hazard Identification, Risk Assessment and Risk Control (HIRARC). Jurnal Intech Teknik Industri Universitas Serang Raya, 7(1), 56–62. https://doi.org/10.30656/intech.v7i1.2709.
Hasanah, T. (2021). Kesehatan dan Keselamatan Kerja (K3) terhadap Kinerja Karyawan. Journal of Management and Bussines (JOMB), 3(1), 48-54. https://doi.org/10.31539/jomb.v3i1.2299.
Lestari, D. A., Rizalmi, S. R., & Setiowati, N. O. (2023). Identifikasi Risiko Kecelakaan Kerja Menggunakan Metode Job Safety Analysis (JSA) pada Rumah Produksi Tahu. G-Tech: Jurnal Teknologi Terapan, 7(4), 1335-1344. https://doi.org/10.33379/gtech.v7i4.3074.
Muhazir, A., Sinaga, Z., Sitorus, H., & Amalia, R. (2023). Analisis potensi bahaya dengan metode hirarc untuk menurunkan angka kecelakaan kerja proses noching pada bagian stamping DI PT. DPL: Perencanaan Waktu Kerja pada Produksi Water Pressure Tank Guna Meningkatkan Produktivitas dengan Metode Time Study. Jurnal Ilmiah Teknik Mesin, 11(2), 120-131. https://doi.org/10.33558/jitm.v11i2.5681.
Mulyojati, P. A. M., & Yuamita, F. (2023). Analisis Potensi Bahaya Kerja Pada Proses Pencetakan Pengecoran Logam Menggunakan Metode Job Safety Analysis (JSA). Jurnal Teknologi dan Manajemen Industri Terapan, 2(2), 90-97. https://doi.org/10.55826/tmit.v2i2.141.
PP, M. R. A., & Putra, B. I. (2025). Behavior Based Safety Implementation for Reducing Workplace Accident Risk: Penerapan Keselamatan Berbasis Perilaku untuk Mengurangi Risiko Kecelakaan Kerja. Indonesian Journal of Innovation Studies, 26(4), 10-21070. https://doi.org/10.21070/ijins.v26i4.2107.
Pradana, D. A., Prasetyo, G., Putra, M. A., Gunawan, I., & Prastyo, Y. (2025). Identifikasi Risiko Kecelakaan Kerja Pada Area Mesin Produksi Pt. Xyz Dengan Metode Job Safety Analysis (Jsa) Dan Metode Fine. Journal of Management and Innovation Entrepreneurship (JMIE), 2(4), 2489-2500. https://doi.org/10.70248/jmie.v2i4.2344.
Purnadi, H. (2021). Pemanfaatan Google Spreadsheet dan Google Data Studio sebagai dashboard suhu dan kelembaban di laboratorium. Jurnal Insan Metrologi, 1(1), 28-33. https://doi.org/10.55101/ppsdk.v1i1.639.
Rachman, G. F., Apriani, E., & Rusnita, E. (2025). Identifikasi Potensi Bahaya Dan Usulan Mitigas Bahaya Pada Area Gudang Produksi Menggunakan Metode Job Safety Analysis (JSA). Jurnal Teknik Industri Manajemen dan Manufaktur, 1(2), 51-82.
Ramadhan, M. Z., Sianturi, I., Ratnaningsih, D., & Rakhman, R. A. (2025). Analisis Pengendalian Risiko Kesehatan dan Keselamatan Kerja (K3) Pada Aktivitas Bongkar di Dermaga Pelabuhan Gresik Menggunakan Metode Hirarc. Jurnal Manajemen Risiko, 6(1), 1-18. https://doi.org/10.33541/mr.v6i1.6964.
Rohmawan, F., & Restuputri, D. P. (2016). Penggunaan Metode Heart Dan JSA Sebagai Upaya Pengurangan Human Error Pada Kecelakaan Kerja Di Departemen Produksi. Jurnal Teknik Industri, 17(1), 1-11. https://doi.org/10.22219/JTIUMM.Vol17.No1.1-11.
Sahara, N. K., & Oktavianty, H. (2024). Analisis Pengaruh Keselamatan dan Kesehatan Kerja (K3) dan Lingkungan Kerja terhadap Produktivitas Kerja dengan Pendekatan Metode Job Safety Analysis di PT. XYZ. Agroforetech, 2(2), 778-791.
Samsudin, A. J., & Satoto, H. F. (2024). Perbaikan Stasiun Kerja Guna Meningkatkan Efisiensi Gerakan Dan Produktivitas Pada Operator Divisi Manual Oplos PT. XYZ. Jurnal Surya Teknika, 11(2), 646-654. https://doi.org/10.37859/jst.v11i2.8305.
Simbolon, R. S., Harramain, F. P., & Sonjaya, M. R. P. (2024). Occupational Safety And Health (OSH) Implementation As A Determinant Of Work Productivity Optimization. Pajamkeu: Pajak Dan Manajemen Keuangan, 1(3), 17-31. https://doi.org/10.61132/pajamkeu.v1i3.122.
Turseno, A., Apriyani, A., Pribadi, A. Y., Nugroho, O. W., & Lestari, T. M. (2025). Perancangan sistem informasi manajemen untuk pengawasan kinerja K3 pada proyek konstruksii. JENIUS: Jurnal Terapan Teknik Industri, 6(2), 389-404. https://doi.org/https://doi.org/10.37373/jenius.v6i2.
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Syalina Amalia, Mochammad Ariq Farizi, Yoga Rizki Fadilah, Rico Ferdinand Alhakim, Yuniar Yuniar (Author)
This work is licensed under a Creative Commons Attribution 4.0 International License.
