Implementasi Industrial and System Engineering Body of Knowledge pada Perusahaan Digital Printing Brightplus Indonesia
DOI:
https://doi.org/10.65310/cap8t975Kata Kunci:
Fabric Rolling Assistive Device, Industrial and Systems Engineering Body of Knowledge, Production Efficiency, Sublimation Printing, Systems DesignAbstrak
The increasing demand for sports jerseys produced through sublimation printing has substantially increased the volume of printed fabric requiring post-printing rolling, creating production bottlenecks due to limited manual material handling capacity at Brightplus Indonesia. This study aimed to develop a fabric rolling assistive device by implementing the Industrial and Systems Engineering Body of Knowledge (ISE BoK), particularly the domains of System Design and Engineering, Design and Manufacturing Engineering, and Work Design and Measurement. A qualitative descriptive case study was employed using observations, semi-structured interviews, documentation, and influence diagram analysis. Two design alternatives were developed and evaluated based on material selection, manufacturability, implementation cost, and operational feasibility. The selected metal-based design required an estimated implementation cost of IDR 1,420,000. Operation Process Chart analysis revealed that the proposed device reduced processing time from 109.5 to 76 minutes per fabric roll, improving production efficiency by approximately 30% while reducing manual handling risks and enhancing ergonomic working conditions.
Unduhan
Referensi
Aft, L., Amaba, B., Berry, D., Brock, J., & Coleman, G. (2021). Industrial and Systems Engineering Body of Knowledge 2021. IISE.
Al, A. L. H. A. K., & Azhar, R. M. (2026). Analisis Implementasi Aplikasi BIMA dan Dampaknya terhadap Pengembangan Sumber Daya Manusia di B21 Digital Printing. Jurnal Nirta: Studi Inovasi, 5(2), 369-383. https://doi.org/10.61412/jnsi.v5i2.376
Anggara, A. I., Santoso, J. D., & Utama, H. (2026). Implementasi Sistem Manajemen Produksi Dan Pemesanan Pada Konveksi Sablon Cambena. Ink Berbasis Website. Jurnal Multidisiplin Bhatara, 3(1), 32-39. https://doi.org/10.59095/jmb.v3i1.267
Aurachman, R. (2018). Perancangan Influence Diagram Perhitungan Dampak Dari Revolusi Industri 4.0 Terhadap Pengangguran Kerja. Jurnal Teknologi dan Manajemen Industri, 4(2), 7-12. https://doi.org/10.36040/jtmi.v4i2.237
Ginting, R. (2023). DFMA (Design for Manufacture and Assembly): Teori dan aplikasi. USU Press.
Hanggara, F. D. (2024). Warehouse Analysis Using 5s and ABC Classification Method on CV. Karya Jaya. SUTEKIN: Jurnal Sains, Teknologi dan Industri, 21(2), 245-253. https://doi.org/10.24014/sitekin.v21i2.28982
Julianti, D., Fitra, F., Haikal, M., & Sitinjak, R. U. (2025). Facility Layout Redesign for an SME Printing Industry Using Systematic Layout Planning: A Case Study in Dumai. Jurnal Teknik Industri: Jurnal Hasil Penelitian dan Karya Ilmiah dalam Bidang Teknik Industri, 11(2), 187-199. https://doi.org/10.24014/jti.v11i2.38058
Kumar, R. (2021). Dynamics of Sublimation Printing. International Journal of Trend in Scientific Research and Development, 5(6), 397–401. https://www.ijtsrd.com/papers/ijtsrd46353.pdf
Mauluddin, Y., Hidayatullah, A. A., & Dara, P. (2025). Rancangan Alat Bantu pada Proses Produksi Tali Kur. Jurnal Kalibrasi, 23(1). https://doi.org/10.33364/kalibrasi/v.23-1.1853
Parnell, G. S., Kenley, C. R., Specking, E., & Pohl, E. (2022). Systems Engineering and Industrial Engineering. INCOSE International Symposium, 32(1), 1010–1021. https://doi.org/10.1002/iis2.12978
Rusandi, & Rusli, M. (2021). Merancang Penelitian Kualitatif Dasar/Deskriptif dan Studi Kasus. Al-Ubudiyah: Jurnal Pendidikan dan Studi Islam, 2(1), 48–60. https://doi.org/10.55623/au.v2i1.18
Sakti, A. Y., & Khairunniza, L. D. E. (2025). Synergizing Ergo-Technology by Integrating Physical, Cognitive, and Organizational Ergonomics for Sustainable Work System Design in Industry 4.0. Jurnal Sistem Teknik Industri, 27(4), 295–307. https://doi.org/10.32734/jsti.v27i4.21901
Setiawan, M. A., Rafika, A. S., Ikhsan, R. Z., Lutfiani, N., & Evans, R. (2025). Optimizing the Potential of 3D Printing for Industry from Prototype to Production. ADIMAS: ADI Pengabdian Kepada Masyarakat, 6(1), 26-37. https://doi.org/10.34306/adimas.v6i1.1193
Suroso, O. V., & Pradana, B. I. (2024). Penerapan Metode 5S Sebagai Upaya Pengurangan Pemborosan. Jurnal Kewirausahaan dan Inovasi, 3(1), 142–152. https://doi.org/10.21776/jki.2024.03.1.12
Tarunokusumo, H. I., Widodo, L., & Sukania, I. W. (2022). Peningkatan Produktivitas Kerja dengan Intervensi Ergonomi Melalui Penambahan Kapasitas Hanger dan Alat Bantu Kerja pada Stasiun Painting di PT. X. Jurnal Mitra Teknik Industri, 1(2), 201–214. https://doi.org/10.24912/jmti.v1i2.21264
Toshikj, E., & Prangoski, B. (2023). Textile Sublimation Printing: Impact of Total Ink Limiting Level and Sublimation Transfer Paper on Black Print Quality. Tekstil ve Konfeksiyon, 33(4), 366–374. https://doi.org/10.32710/tekstilvekonfeksiyon.1145260
Vadillah, R., & Nelmira, W. (2025). Proses Sublimasi Printing pada Produksi Jersey di Konveksi Limo Sportwear Apparel Kota Padang. EDUTECH, 24(2), 1217–1223. https://doi.org/10.17509/e.v24i2.84354
Widodo, L., Ariyanti, S., & Kurniawan, F. A. (2018). Perancangan Stasiun Kerja Ergonomis pada Stasiun Kerja Printing CV. Karyamitra Lestari. Jurnal Ilmiah Teknik Industri, 6(1). https://doi.org/10.24912/jitiuntar.v6i1.3021
Widodo, L., Utama, D. W., & Pujianto, L. Y. (2022). Perancangan Alat Bantu Proses Penggulungan Kertas Roll pada UMKM Gracia Paper. Jurnal Ilmiah Teknik Industri, 10(2), 98–108. https://doi.org/10.24912/jitiuntar.v10i2.18134
Yamin, I., Suharto, N. P., Satriaji, T. B., Sinur, V. V. ., & Zulkarnain, Z. (2025). Analysis of Overall Equipment Effectiveness and Six Big Losses for Performance Improvement: Case Study of the Versant 3100i Printing Machine at CV XYZ. Jurnal Sains Dan Aplikasi Keilmuan Teknik Industri (SAKTI), 5(02), 97–110. https://doi.org/10.33479/sakti.v5i02.143
Unduhan
Diterbitkan
Terbitan
Bagian
Lisensi
Hak Cipta (c) 2026 Fauzan Atha Tri Handaru, Muhammad Akhsan Genta Satria (Author)
Artikel ini berlisensi Creative Commons Attribution 4.0 International License.
