The Effect of Mineral Acid Type on the Synthesis of Acid-Activated Montmorillonite on the Structure, Morphology, and Performance of Bleaching Earth

Authors

  • Hanifah Sriamelia Universitas Negeri Padang Author
  • Riri Jonuarti Universitas Negeri Padang Author

DOI:

https://doi.org/10.65310/qjnaem59

Keywords:

Adsorption, Acid Activation, Bleaching Earth, Palm Oil, Montmorillonite.

Abstract

Montmorillonite (MMT) is a clay mineral belonging to the smectite group, characterized by a large surface area, high cation exchange capacity, and a layered structure, making it a promising bleaching earth for palm oil refining. However, natural montmorillonite exhibits limitations, including a low number of active sites and limited porosity, thus requiring acid activation to enhance its performance. This study aims to analyze the effect of different mineral acids on the crystal structure, morphology, and bleaching performance of acid-activated montmorillonite. Activation was carried out using HCl, H₂SO₄, HNO₃, and H₃PO₄ at a concentration of 1 M for 3 hours. Characterization was conducted using X-ray diffraction (XRD) to determine crystallinity, scanning electron microscopy (SEM) to observe surface morphology, and UV–Vis spectrophotometry to evaluate bleaching performance. The XRD results revealed that sulfuric acid produced the largest crystal size (78.8 nm) with the highest degree of homogeneity. Activation with HCl resulted in a crystal size of 64.5 nm, H₃PO₄ yielded 68.3 nm, and HNO₃ produced 68.5 nm. SEM analysis showed the formation of new pores and a rougher surface texture after activation. HCl activation yielded the most favorable surface morphology. Bleaching tests demonstrated a significant reduction in color intensity and β-carotene content in palm oil.

 

Downloads

Download data is not yet available.

References

Adhika, R., et al. (2018). Scanning electron microscopy untuk analisis morfologi permukaan. Jurnal Fisika Material, 9(3), 145–152.

Afandi, A., & Purwanto, B. (2018). Analisis spektrum UV-Vis dalam penelitian kimia. Jurnal Fisika dan Kimia, 7(1), 22–30.

Alexsandra, R. D. N., et al. (2015). Pengaruh perlakuan asam pada reaksi esterifikasi asam oleat. Jurnal Kimia dan Energi, 11(2), 99–107.

Ali, M., Surjandari, S., & Ayyubi, A. (2021). Pengaruh aktivasi asam terhadap karakteristik montmorillonite. Jurnal Fisika Material, 12(3), 45–56.

Ayyubi, A., & Admaja, T. (2020). Karakterisasi montmorillonite yang diaktivasi asam untuk aplikasi adsorpsi. Jurnal Kimia dan Material, 15(2), 123–130.

Balbay, A., Selvi_tepe, N., & Saka, C. (2020). Fe doped-CoB catalysts with phosphoric acid activated montmorillonite as support for efficient hydrogen production via NaBH4 hydrolysis. International Journal of Hydrogen Energy.

Gulo, I. (2016). Analisis kualitas air menggunakan spektrofotometer UV-Vis. Jurnal Lingkungan dan Teknologi, 8(1), 78–85.

Hakim, A., & Dirgantara, T. (2019). Teknik difraksi sinar-X untuk analisis struktur kristal. Jurnal Fisika dan Aplikasi, 10(4), 201–210.

Horri, N., Sanz-Pérez, E. S., Arencibia, A., Sanz, R., Frini-Srasra, N., & Srasra, E. (2020). Effect of acid activation on the CO₂ adsorption capacity of montmorillonite. Adsorption, 26(5), 793–811. https://doi.org/10.1007/s10450-020-00200-z

Krupskaya, V. V., Zakusin, S. V., Tyupina, E. A., Dorzhieva, O. V., Zhukhlistov, A. P., Belousov, P. E., & Timofeeva, M. N. (2017). Experimental study of montmorillonite structure and transformation of its properties under treatment with inorganic acid solutions. Minerals, 7(4), 49. https://doi.org/10.3390/min7040049

Mele, A., Gjurgjaj, L., Lica, J., Mema, A., Mele, A., Çaçani, I., & Keri, J. (2023). Changes in surface and structure of montmorillonite by acid activation. Dental Materials. https://doi.org/10.1016/j.dental.2023.08.068

Sari, R. (2010). Hukum Lambert-Beer dalam spektroskopi. Jurnal Fisika Dasar, 5(2), 34–40.

Sharma, S., & Sarasan, G. (2017). Pengaruh aktivasi asam pada tanah liat montmorillonit kalsium alami. Jurnal Material dan Sains, 12(4), 234–240.

Shen Tong, D., Xia, X., Luo, X. P., Wu, L. M., Lin, C. X., Yu, W. H., Zhou, C. H., & Zhong, Z. K. (2013). Catalytic hydrolysis of cellulose to reducing sugar over acid-activated montmorillonite catalysts. Applied Clay Science, 74, 147–153. https://doi.org/10.1016/j.clay.2012.10.021

Shwan, D., Abdalqadir, M., Rezaei Gomari, S., Pak, T., & Hughes, D. (2024). A comparative study of acid-activated non-expandable kaolinite and expandable montmorillonite for their CO₂ sequestration capacity. Reaction Kinetics, Mechanisms and Catalysis, 137, 375–398. https://doi.org/10.1007/s11144-023-02345-8

Surjandari, S., Ayyubi, A., & Tirtaadmaja, S. (2021). Montmorillonite: Sifat dan aplikasi dalam industri. Jurnal Material dan Biofisika, 14(1), 67–75.

Surrahman, A. (2019). Pemurnian minyak nabati menggunakan bleaching earth. Jurnal Teknologi Pertanian, 11(3), 89–95.

Tirtaadmaja, S. (2019). Penggunaan montmorillonite dalam proses katalisis dan adsorpsi. Jurnal Kimia Terapan, 13(2), 112–120.

Victoria, Zeynizadeh, B., & Rahmani, S. (2019). Immobilized copper-layered nickel ferrite on acid-activated montmorillonite [(NiFe₂O₄@Cu)(H⁺-Mont)] as a superior magnetic nanocatalyst for the green synthesis of xanthene derivatives. RSC Advances, 9(54), 31455–31466. https://doi.org/10.1039/C9RA06789H

Volterrani, M., Afandi, A., & Purwanto, B. (2017). Spektrofotometri UV-Vis dalam analisis kimia. Jurnal Analisis dan Metode, 9(1), 45–52.

Zeng, Y., Zhao, L., & Ma, J. (2023). Perubahan komposisi dan struktur montmorillonite dalam larutan asam. Jurnal Material dan Lingkungan, 16(2), 201–210.

Zeynizadeh, B., & Rahmani, S. (2019). Immobilized copper-layered nickel ferrite on acid-activated montmorillonite [(NiFe₂O₄@Cu)(H⁺-Mont)] as a superior magnetic nanocatalyst for the green synthesis of xanthene derivatives. RSC Advances, 9(54), 31455–31466. https://doi.org/10.1039/C9RA06789H

Published

2026-04-18

How to Cite

The Effect of Mineral Acid Type on the Synthesis of Acid-Activated Montmorillonite on the Structure, Morphology, and Performance of Bleaching Earth. (2026). Journal of Science, Technology, and Innovation, 1(3), 201-211. https://doi.org/10.65310/qjnaem59